200302188 93-2117 B020-016 & B022-016 Owner's Manual.qxd
Appendix D
Standard Rack Mounting for B022-016
The standard rack mounting brackets that come attached to the B022-016 allow the unit to be installed in
standard 1U racks. Simply slide it into the rack and screw it securely in place.
Rack Mounting for B020-016
The B020-016 can be mounted in a 1U
system rack. For convenience and flexibility,
a rack mounting kit that allows several
mounting options has been included.
The various options are explained in the
sections that follow.
Optional Rack Mounting
If there is not enough clearance for the
unit to slide into the rack when the rear
flanges face outward, the problem can be
resolved with the following procedure:
1) Unscrew the rear mounting brackets
from the chassis.
2) Turn the brackets so that the
flanges face inward; then screw
them back into the chassis.
Note: Be sure to leave a 13 mm
gap between the flange and the
rear of the chassis in order to
have enough room to screw the
tab to the flange (see step 4).
3) Slide the unit into the rack.
4) Screw the metal tabs to the
rear flanges.
5) Secure the unit to the rack with
the front flanges and rear tabs.
3/20/2003
27
1:32 PM
Page 27