Advertisement
AddressRight® DA950 Printer
Assembling the
Printer
(continued)
USB Cable
A. Align the squarer end of the USB cable to the USB port on the printer. Push
the cable connector completely in.
B. Align the flatter end of the USB cable to the USB port on the computer or
USB hub. Push the cable connector completely in.
6. Connecting the Power Cord and Turning the Printer ON
A. Make sure that the power switch is
turned OFF (0), then connect the
power cord to the printer.
B. Plug the power cord into a grounded
outlet.
Once you've connected the cable, press
the printer's power switch to the "I"
(ON) position. The switch is located next
to the power cord receptacle.
When you turn the printer on. The LCD
menu displays that the printer is initial-
izing. After a few seconds, the printer
will automatically go "ON LINE".
You can tell if the printer is ON LINE, by looking at the indicator light above the
ON LINE key. When the printer is ON LINE, the indicator will be lit.
Parallel cable and power cord connections
USB cable and power cord connections
SV61184 Rev. B
Installation Instructions
Power plug and receptacle
Power switch
Page 7 of 10
Advertisement
