Table of Contents
Advertisement
6.
Place the AC adapter in the holder and close the stand cover,
see illustration below.
7.
Turn on the display unit using the power switch (1) and check
to make sure that the power LED (2) is on, as shown below. If
not, repeat steps 3 to 5 or refer to the Troubleshooting section
of this guide.
8.
Turn on the power to the computer. The picture will appear
within about 15 seconds. Adjust the picture to obtain optimum
picture quality. See the Adjusting the picture section in this
guide for more information.
Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date
March 2, 1998
English
8
Advertisement
Table of Contents
