Stopping Boat; Stopping Engine; Procedure - Yamaha 40X Owner's Manual

2. After the engine is at idle speed in gear
move the remote control lever / gear
shift lever firmly and crisply into the neu-
tral position.
EMU31742
EWM01510
Do not use the reverse function to slow
●
down or stop the boat as it could cause
you to lose control, be ejected, or im-
pact the steering wheel or other parts of
the boat. This could increase the risk of
ZMU02030
serious injury. It could also damage the
shift mechanism.
Do not shift into reverse while traveling
●
at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle.
The stopping distance varies depending on
gross weight, water surface conditions, and
wind direction.
EMU27821
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27847

Procedure

1. Push and hold the engine stop button or
turn the main switch to "

Stopping boat

WARNING

Stopping engine

Operation
N
ZMU03064
" (off).
43