Tilt Support Knob; Tilt Support Bar; Cowling Lock Lever(S) (Turn Type) - Yamaha 40X Owner's Manual

Components
1. Tilt lock lever
To lock it, set the tilt lock lever in the lock po-
sition. To release, push the tilt lock lever in
the release position.
EMU26321

Tilt support knob

To keep the outboard motor in the tilted up
position, push the tilt support knob under the
swivel bracket.
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
22
EMU26333

Tilt support bar

The tilt support bar keeps the outboard motor
in the tilted up position.
1
ZMU03041
ECM01660
NOTICE
Do not use the tilt support bar when
trailering the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the
tilt position.
EMU26373

Cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the
cowling lock lever(s) and lift off the cowling.
When installing the cowling, check to be sure
it fits properly in the rubber seal. Then lock
ZMU03042
the cowling again by returning the cowling
lock lever(s) to the lock position.
ZMU03043