Specifications And Requirements; Specifications - Yamaha 40X Owner's Manual

EMU31480

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
EMU2821J
Dimension:
Overall length:
40XWT 675 mm (26.6 in)
E40XMH 1073 mm (42.2 in)
Overall width:
40XWT 362 mm (14.3 in)
E40XMH 402 mm (15.8 in)
Overall height S:
1237 mm (48.7 in)
Overall height L:
1364 mm (53.7 in)
Overall height X:
1461 mm (57.5 in)
Transom height S:
424 mm (16.7 in)
Transom height L:
550 mm (21.7 in)
Transom height X:
649 mm (25.6 in)
Weight (AL) S:
72.0 kg (159 lb)
Weight (AL) L:
40XWT 80.7 kg (178 lb)
E40XMH 73.6 kg (162 lb)
Weight (AL) X:
E40XMH 76.7 kg (169 lb)
Performance:
Full throttle operating range:
4500–5500 r/min
Maximum output:

Specifications and requirements

Engine:
Drive unit:
29.4 kW@5000 r/min
(40 HP@5000 r/min)
Idle speed (in neutral):
1000 50 r/min
Type:
2-stroke L
Displacement:
3
703.0 cm
Bore  stroke:
80.0  70.0 mm (3.15  2.76 in)
Ignition system:
CDI
Spark plug with resistor (NGK):
BR7HS
Spark plug gap:
0.6–0.7 mm (0.024–0.028 in)
Control system:
40XWT Remote control
E40XMH Tiller handle
Starting system:
40XWT Manual starter and Electric
starter
E40XMH Manual starter
Starting carburetion system:
Choke valve
Min. cold cranking amps (CCA/EN):
40XWT 430.0 A
Min. rated capacity (20HR/IEC):
40XWT 70.0 Ah
Alternator output:
E40XMH 80 W
Maximum generator output:
40XWT 6 A
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00 (26/13)
Trim and tilt system:
40XWT Power trim and tilt
9