Troubleshooting & Specifications - SiPix StyleCam Blink Owner's Manual

Troubleshooting
Problem Possible cause
The camera The camera is off.
has no power.
The battery is
discharged.
The battery is
inserted incorrectly.
The camera Is the camera's
power on?
won't take a
picture.
Is the camera
connected to a
computer?
The pictures The Camera or
are blurry.
subject was moving
when the picture
was taken.
Specifications
Image Sensor
Output resolution
Image capacity
Internal memory
View finder
Status display
Focal range
Lens aperture
Lens focal length
White balance
Exposure adjustment
Image format
Computer interface
Power control
Power source
Tilt base
Camera weight
Camera dimensions
Troubleshooting & Specifications
Solution
Make sure that the Power indicator is red.
Replace the battery with new or freshly charged one. Refer
to page 4.
Check the battery orientation. Refer to page 4.
The camera has auto power off after 60 seconds. Make
sure the camera's power is ON before taking a picture.
The camera's buttons are not functional when connected to
a PC. Disconnect the camera to take more pictures.
Hold the camera steady or put it on a tripod to take
pictures. After pressing shutter button, do not move the
camera until you hear a Beep.
CMOS
640 x 480 pixels
VGA (640 x 480): 100 (varies) CIF (320 x 240): 300 (varies)
8MB SDRAM
Optical
Monochrome LCD
90cm ~ infinity
F3.0
6.3mm (35mm equivalent = 24mm)
Auto (indoors), Manual (indoors, outdoors)
Auto
JPEG, AVI (trough software)
USB
Auto power off (60 seconds)
1 AAA alkaline battery
Included
1.5 oz. Without batteries (30g)
.6" x 1.97" x 1.97" (1.5 x 5 x 5cm)
18