Using The Stylecam Blink As A Pc Camera - SiPix StyleCam Blink Owner's Manual

The SiPix StyleCam Blink allows you to connect to your computer with the supplied USB cable
and use it as a PC camera. Please follow the instructions below carefully.
Connecting the StyleCam Blink to a PC
1. Set your StyleCam Blink on the tilt base (supplied) and
place it on a flat surface. Or the tilt base can be place on a
computer monitor as shown below.
2. Connect one end of the USB cable to StyleCam Blink and
the other end of the USB cable to your computer's USB
port.
3. To make the StyleCam Blink tilt base additionally stable
when on desktop or monitor, place the barrel, located on
the USB cable, within the bottom of the tilt stand.
Note: Do not disconnect the USB cable while you are using the StyleCam Blink as a PC
camera. It may lock up the computer, and require a reboot.
Using the ArcSoft VideoImpression
1. To open ArcSoft VideoImpression 1.6, go to Start Menu à Programs à ArcSoft
VideoImpression à VideoImpression 1.6.
2. Click "New" icon on the left side of the VideoImpression screen.
3. Click "Acquire" icon on the left side of the VideoImpression screen.
4. The application should automatically detect your StyleCam and begin displaying the
image from the camera.
Using the Inetcam iVISTA
Setting up iVISTA
1. Open the iVISTA application. Go to: Start Menu à Programs à Inetcam à iVISTA,
and then open the iVISTA Control Panel.
2. From the Control Panel, click on the Video button on the upper right, and choose
Webcast Video.
3. The Video icon should turn yellow to indicate you are actively webcasting.

Using the StyleCam Blink as a PC Camera

16
Insert barrel