Troubleshooting - SiPix StyleCam Snap Owner's Manual

Problem
The camera has no
power.
The camera won't
take a picture.
The pictures are
blurry.
The picture is too
light.
My computer cannot
detect the StyleCam
Snap
Possible cause
The batteries are discharged.
The batteries are inserted
incorrectly.
Is the camera connected to a
computer?
Is the camera's power on?
Is the camera connected to a
computer?
The camera or subject was
moving when the picture was
taken.
You are facing a bright light
when taking the picture.
USB connection failure
Solution
Replace the batteries with freshly charged ones.
Check the battery orientation.
The camera's buttons are not functional when
connected to a PC. Disconnect the camera to take
more pictures.
The camera powers off automatically after 30
seconds. Make sure the camera's power is ON
before taking a picture.
The camera's buttons are not functional when
connected to a PC. Disconnect the camera to take
more pictures.
Hold the camera steady to take pictures.
Change the angle of the picture so that bright
lights do not shine directly towards the camera
lens.
Use the USB Doctor program provided by the Style-
Cam Snap. Insert the CD into your CD-ROM drive, go
to My Computers
drive). Open "Utilities" folder and double click on USB
Doctor program. Follow the on-screen instruction to use
the program.
20
T R O U B L E S H O
T R O U B L E S H O
D:\ (Where "D:\" is your CD-ROM
O T I N G
O T I N G