Cleaning The Filter - Trane R410A Owner's Manual

Split system (r410a) 16 seer, inverter units 9,000 to 24,000 btu/hr
Hide thumbs Also See for R410A:
Table of Contents

Advertisement

Maintenance
Potential Fire Hazard!
Never dry the filters using a fire. Failure to follow this safety precaution could result in
the filter catching on fire which could cause minor to moderate injury or property only
damage.
3.
Check before use
1.
Ground Wire!
All field-installed wiring must be completed by qualified personnel. All field-installed
wiring must comply with NEC and applicable local codes. Failure to follow this
instruction could result in death or serious injuries.
2.
3.
4.
Maintain after use
Hazardous Voltage!
Disconnect all electric power, including remote disconnects before servicing. Follow
proper lockout/tagout procedures to ensure the power can not be inadvertently
energized. Failure to disconnect power before servicing could result in death or serious
injury.
1.
2.
14
CAUTION
Reinsert the filters
Reinsert the filters along with the arrow head, then close the front panel.
Make sure that nothing obstructs the air outlet and intake vents.
WARNING
Make sure the ground wire is properly connected.
Make sure the batteries in the remote control are working; change them if necessary.
Check the subbase at the outdoor unit. If damaged, please contact the dealer.
WARNING
Clean the filter and indoor and outdoor units' cabinets.
Clean and repaint any sign of rust on the outdoor unit to prevent it from spreading.
MS-SVU29A-EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4mxw64txw6

Table of Contents