Trane R410A Owner's Manual page 11

Remote Control Operation
Figure 3. Batteries
Emergency Operation
If the wireless remote control is lost or broken, use the manual switch inside de unit. This will
place the system in the AUTO mode, thus settings for fan speed and temperature cannot be
changed. To allow for control, using a ball point pen or similar device, do the following:
To turn the unit ON:
With the unit off, locate the Manual Switch and with the ball point pen press the manual switch as
shown. The unit will automatically go into the AUTO state of operation. The microcomputer will
detect the indoor temperature to select COOL, HEAT, FAN to achieve the degree of comfort.
To turn the unit OFF:
With the unit on, locate the manual switch STOP button. The unit will stop running.
MS-SVU29A-EN 11