Q-See QC818 User Manual page 31

4.5 REMOTE DEVICE
While cameras connected directly to the NVR through the POE ports will automatically
connect and display video, remote cameras connected to your system must be located
and added manually. This can be done through the process described in Section 2.4 IP
Cameras at the beginning of this manual or through the Remote Device window.
Use of remote devices requires that your NVR is connected to a router. These devices can
be IP cameras or even QC-series DVRs. If you intend to connect to devices that are located
outside of your local network, then this router must be able to access the Internet. Instructions
for connecting your system to the Internet are presented in the Remote Monitoring Guide
that also came on the CD with your system. It is also available from our online resource at
www.Q-See.com/Support.
Similarly, the remote devices must be able to communicate with the local network or Internet.
This will be covered in Chapter 4 of the Remote Monitoring Guide as well.
This window can be reached by clicking on
the Remote Device icon in the Main menu...
...or through the Shortcut menu by right-
clicking on the screen and selecting Remote
Device.
60
MAIN MENU
SEARCH RECORD SETTINGS SETTING
REMOTE DEVICE ADVANCED BACKUP
INFO SHUTDOWN
View 1
View 4
View 8
PICTURE 4-25
View 9
View 16
Pan/Tilt/Zoom
Auto Focus
Color Setting
Search
Record Status
Tour Setup
Remote Device
Alarm Output
Main Menu
PICTURE 4-26
When the window opens, you will be presented with a list of all connected devices in the
lower portion. This section, marked Device Added, indicates the status of each device along
with other information about it.
REMOTE DEVICE
4 IP Address Port
1 10.1.1.65 Port 1
2 10.1.1.67 Port 2
3 10.1.1.68 Port 4
4 196.219.8.50 4000
IP Search Add
Device Added
channel Edit Delete IPC Config
1
2
3
4
Delete Manual Add
PICTURE 4-27
Icon Meaning Description
You may edit the settings on this device by double-clicking on it
Editable
This device is connected directly to the NVR and must be physically
Cannot
unplugged to be removed from this list.
Delete
This device may be deleted from the list by checking the box next
Removable
to it and clicking on the Delete button below.
Configure Clicking on this icon will allow you to configure the video from this
IP Camera camera.
The connected device is operating normally.
Device
Status OK
There is an issue with the connected device that is preventing it
Device
from operating normally.
Error
Clicking on IP Search under the upper portion of the window will generate a list of all devices
that the NVR was able to locate - both directly connected as well as connected to the same
network as your system. Items showing a short IP address beginning with "10" are cameras
directly connected to the NVR and who's IP addresses were assigned by the NVR itself. Care
should be taken that you do not attempt to connect a device that is already connected to the
system as it will create a duplicate video feed and could cause connectivity issues.
Device ID Manufacturer Type
YZC2OC061966 Private IPC
YZCAU192012 Private IPC
TC2FW25600095 Private IPC
Private
None
Show Filter
Status IP Address Port Device ID
196.610.6.46 37777
10.1.1.67 Port 2 YZCAU192012
10.1.1.68 Port 4 TC2FW25600095
10.1.1.65 Port 1 YZC2OC061966
OK Cancel
61