Advertisement
STEP 7
NOTE: The RIGHT PEDAL(56)
has R stamped on the end of the pedal shaft. The RIGHT PEDAL(56)
has right hand threads and is tightened
by turning clockwise.
The LEFT PEDAL(55)
has L
stamped
on the end of the pedal shaft. The LEFT PEDAL(55)
has left hand threads and is
..... tightened by,.turning counterclockwise
....
Thread the RIGHT PEDAL(56)
into the RIGHT CRANK(54)
as shown. Tighten the pedal securely.
Repeat on the left side to attach the LEFT PEDAL(55) to the LEFT CRANK(53).
STEP 8
Attach the SEAT(70) to the SEAT POST(4) with NYLOCK NUTS(M8xt.25)(92)
and WASHERS(M8)(96),
Insert the SEAT POST(4) into the MAIN FRAME(l)
and secure with the ADJUSTMENT
KNOB(72).
NOTE: The pin of the ADJUSTMENT
KNOB(72) must be inserted into one of the adjustment holes in the
SEAT POST(4) and the ADJUSTMENT
KNOB(72)
must be screwed in tight to ensure that the
SEAT POST(4) will fit securely in the MAIN FRAME(I).
7O
96
92
/
4
55
96
92
72
54
56
11
Advertisement
