Stamina 15-1101 Owner's Manual page 10

STEP 5
Bolt the HANDLEBAR SHAFTS(69) to the MAIN FRAME(l) on both sides and securely tighten.
STEP 6
S l;de th e, WASH E R(e! 6.2xe 22 x l. 5mm)(60).on to the H AND L EBA R SHAET (69). S!Jde t he RIGH
HANDLEBAR(7) onto the HANDLEBAR SHAFT(69) in approximately the center of the sliding range.
Place the PLASTIC WASHER(e10xo18x2mm)(58) on the SHAFT on the lower end of the RIGHT
HANDLEBAR(7). Connect the right LINKAGE(8) to the RIGHT HANDLEBAR(7), then slide the RIGHT
HANDLEBAR(7) completely onto the HANDLEBAR SHAFT(69). Secure the right LINKAGE(8) with the
PLASTIC WASHER(o10xet8x2mm)(58), WASHER(M8)(96), and NYLOCK NUT(M8x1.25)(92). Secure
the RIGHT HANDLEBAR(7)with WAVY WASHER(e17x_22x0.4mm)(49), WASHER(_10xo25.4x2mm)
(61), LOCK WASHER(M10)(114), and BUTTON HEAD BOLT(M10x1.Sx15mm)(113). Repeat on other
side.
6l
Shaft
6O
58
69
8
92
96
58
69
6O
58
9
61
114
tt3
.J
t0