Original Features For Picture - JVC AV-29MXP6/V Service Manual

Original features for picture

PIP
You can display a sub picture within the main picture on the screen.
Press the PIP operation buttons to display and change the sub
picture setting.
PIP Display the sub picture.
To cancel, press the PIP button again.
Notes:
• You can hear the sound from the main picture only.
• When main picture and sub picture are the same TV channel.
Main picture will be changed TV channel
Press SUB-P -/+
follow as sub picture.
To change sub picture to video mode.
Press ( Input )
Sub picture will be changed TV channel follow
Press CHANNEL -/+
as Main picture.
Press CHANNEL -/+ Until main picture change to video mode.
SUB-P -/+ Select the desired TV channel for sub picture.
Select the input source for the sub picture.
(Input)
Swap between the main picture and sub picture.
(Swap)
(Position) Change the sub picture position.
Each time you press the
position will change as follows:
lower right lower left
upper right
(Freeze) Freeze the sub picture.
When VIDEO-2 is set to component, you cannot select VIDEO-2
for sub picture. If the main picture input source is VIDEO-2 with
component, the PIP function is disabled.
12
(Position) button, the sub picture
upper left
About the basic operations of the menu, please see the "How to
operate menus and menus locations" on page 5.