Table of Contents
Advertisement
Quick Links
COLOUR TELEVISION
AV-29MS16
AV-29SS16
AV-25MS16
AV-21MS16
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV's features .......................................................3
Remote control buttons and basic functions ..............................4
TV buttons and functions ............................................................6
Setting up your TV ......................................................................7
Basic setting for picture ..............................................................9
Advanced setting for picture ..................................................... 11
Basic setting for sound .............................................................12
Advanced setting for sound ......................................................13
DVD Menu ................................................................................14
Customized setting ...................................................................15
TV channel presetting ..............................................................17
Additional preparation ..............................................................20
Troubleshooting ........................................................................21
Specifi cations ............................................................. Back cover
INSTRUCTIONS
GGT0118-001A-H
Advertisement
Table of Contents
Related Manuals for JVC GGT0118-001A-H
Summary of Contents for JVC GGT0118-001A-H
- Page 1 Basic setting for picture ...9 Advanced setting for picture ... 11 Basic setting for sound ...12 Advanced setting for sound ...13 DVD Menu ...14 Customized setting ...15 TV channel presetting ...17 Additional preparation ...20 Troubleshooting ...21 Specifi cations ... Back cover INSTRUCTIONS GGT0118-001A-H...
- Page 2 Never rub it forcefully. Never use any cleaner or detergent on it. Thank you for buying this JVC colour television. 7 This TV can be turned on/off power by connecting/disconnecting the AC plug into AC outlet. While this TV is being installed, enough space should be reserved for connection/disconnecting the AC plug into AC outlet by hand.
- Page 3 Knowing your TV’s features Main features DVD MENU MaxxBass EXIT FAVORITE CH (Channel) A2/NICAM (STEREO / I . II) AI ECO SENSOR AI VOLUME WHITE BALANCE TINT Confi rm your TV’s functions RM-C1286 Some functions written in this instruction manual may not be available for your TV. Please see the chart below and check the functions that are equipped for your TV’s model number.
- Page 4 Remote control buttons and basic functions No. Press 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number.
- Page 5 Remote control buttons and basic functions (continued) How to operate menus and menus locations Operation Press the MENU/OK button 2. Display the MENU PICTURE MENU is displayed on fi rst press. Press 2/3 buttons 3 to choose Choose a Top menu a menu title when the cursor is pointing at MENU.
- Page 6 TV buttons and functions The illustrations shown below is for AV-21MS16 and AV-29SS16 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Front of the TV AV-29SS16 POWER TV/VIDEO MENU/OK CHANNEL VOLUME AV-21MS16 Rear of the TV AV-29SS16...
- Page 7 (VIDEO-2) OUTPUT INPUT MONO JVC logo will appear on the screen again at the phase of “SETUP TOUR RESTART?” function. Then the initial setting can be performed according to page 8. Note: While in the INSTALL menu with the cursor pointing at INSTALL, pressing the blue button will also display the JVC logo.
- Page 8 Setting up your TV (continued) Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: LANGUAGE AUTO PROGRAM ENGLISH MENU : OK DISPLAY : BACK TV/VIDEO : EXIT •...
- Page 9 Basic setting for picture COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. AUTO SECAM NTSC4.43 To operate this function with a menu: MENU INSTALL menu COLOUR SYSTEM...
-
Page 10: Picture Setting
Basic setting for picture (continued) PICTURE SETTING You can adjust the desired picture setting when selecting USER in PICTURE MODE. Select USER in PICTURE MODE under PICTURE menu. MENU PICTURE menu USER Select PICTURE SETTING in PICTURE menu, then adjust the setting. - Page 11 Advanced setting for picture AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. Cancel the function. MODE-1 Mild contrast (recommended.) MODE-2 Even contrast. DISPLAY Display the graphic of the function.
- Page 12 Basic setting for sound SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. This function is not available in video mode. For the sound system in each country or region, see the table below: Area Country or Region...
- Page 13 Advanced setting for sound CINEMA SURROUND You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. Cancel the function. Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO.
- Page 14 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically. And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choose ON or OFF (Factory setting is ON).
- Page 15 Customized setting You can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. MENU PICTURE menu VNR is turned off. AUTO Effect of VNR is automatically controlled. Effect of VNR becomes minimum level. Effect of VNR becomes maximum level.
- Page 16 Customized setting (continued) VIDEO-2 SETTING You can set the VIDEO-2 SETTING according to the video signal output from external devices connected to the VIDEO-2 terminal. Select VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT). MENU INSTALL menu VIDEO If a normal video signal (composite video signal) is input.
- Page 17 TV channel presetting To register the TV channels automatically (AUTO PROGRAM) You can register the TV channels into the TV’s channel list automatically. Display the INSTALL menu. MENU INSTALL menu Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically.
- Page 18 TV channel presetting (continued) To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu) You can edit the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be changed. Display the INSTALL menu. MENU INSTALL menu Choose EDIT/MANUAL, then press the MENU/OK button.
- Page 19 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 18, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc..
- Page 20 Additional preparation The illustrations shown in this section are for AV-21MS16 and AV- 29SS16 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection.
- Page 21 Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • No picture, no sound • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM”...
- Page 22 Specifi cations TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50 Hz / 60 Hz External input / output...
-
Page 23: Table Of Contents
COLOUR TELEVISION AV-29BS26 AV-21BS26 AV-29BX16 AV-21BX16 AV-29MS26 AV-21BX16B AV-29MX16 AV-21MS26 AV-29MX56 AV-21MX16 AV-29MX76 AV-21MX56 AV-29SS26 AV-21MX76 AV-29SX56 AV-29SX76 AV-25MS26 AV-25MX16 AV-25MX56 AV-25MX76 EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’s features ...3 Remote control buttons and basic functions ...4 TV buttons and functions ...6 Setting up your TV ...7 Basic setting for picture ...9... - Page 24 Never rub it forcefully. Never use any cleaner or detergent on it. Thank you for buying this JVC colour television. 7 This TV can be turned on/off power by connecting/disconnecting the AC plug into AC outlet. While this TV is being installed, enough space should be reserved for connection/disconnecting the AC plug into AC outlet by hand.
-
Page 25: Knowing Your Tv's Features
Knowing your TV’s features Main features DVD MENU MaxxBass EXIT PIP (Picture In Picture) TELETEXT FAVORITE CH (Channel) A2/NICAM (STEREO / I . II) AI ECO SENSOR ECO MODE AI VOLUME TINT Confi rm your TV’s functions Some functions written in this instruction manual may not be available for your TV. Please see the chart below and check the functions that are equipped for your TV’s model number. -
Page 26: Remote Control Buttons And Basic Functions
Remote control buttons and basic functions No. Press 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. - Page 27 Remote control buttons and basic functions (continued) How to operate menus and menus locations Operation Display the MENU Press the MENU/OK button 2. PICTURE MENU is displayed on fi rst press. Press 2/3 buttons 3 to choose Choose a Top menu a menu title when the cursor is pointing at MENU.
-
Page 28: Tv Buttons And Functions
TV buttons and functions The illustrations shown below is for AV-21BS26 and AV-29SS26 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Front of the TV AV-29SS26 POWER TV/VIDEO MENU/OK CHANNEL VOLUME AV-21BS26 L / MONO CHANNEL... -
Page 29: Setting Up Your Tv
(VIDEO-2) OUTPUT INPUT MONO JVC logo will appear on the screen again at the phase of “SETUP TOUR RESTART?” function. Then the initial setting can be performed according to page 8. Note: While in the INSTALL menu with the cursor pointing at INSTALL, pressing the blue button will also display the JVC logo. - Page 30 Setting up your TV (continued) Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: LANGUAGE TEXT LANGUAGE TEXT LANGUAGE ENGLISH GROUP–1 êìëëäàâ GROUP–2 GROUP–3 GROUP–4 FRANÇAIS...
-
Page 31: Basic Setting For Picture
Basic setting for picture COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. AUTO SECAM NTSC4.43 To operate this function with a menu: MENU INSTALL menu COLOUR SYSTEM... - Page 32 Basic setting for picture (continued) PICTURE SETTING You can adjust the desired picture setting when selecting USER in PICTURE MODE. Select USER in PICTURE MODE under PICTURE menu. MENU PICTURE menu USER Select PICTURE SETTING in PICTURE menu, then adjust the setting.
-
Page 33: Advanced Setting For Picture
Advanced setting for picture AI ECO SENSOR (ECO)/ECO MODE You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. Cancel the function. MODE-1/ECO-1 Mild contrast (recommended.) MODE-2/ECO-2 Even contrast. DISPLAY (for AI ECO SENSOR only) Display the graphic of the function. -
Page 34: Original Features For Picture
Original features for picture You can display a sub picture within the main picture on the screen. Press the PIP operation buttons to display and change the sub picture setting. PIP Display the sub picture. To cancel, press the PIP button again. Notes: •... -
Page 35: Text Language
Original features for picture (continued) TEXT LANGUAGE You can set the Teletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INSTALL menu, then choose the desired language group. MENU INSTALL menu GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian, Italian, French, Spanish, Portuguese, Turkish GROUP-2 Polish, German, Estonian, Slovenian, Czech, Slovakian,... -
Page 36: Basic Setting For Sound
Basic setting for sound SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. This function is not available in video mode. For the sound system in each country or region, see the table below: Area Country or Region... -
Page 37: Advanced Setting For Sound
Advanced setting for sound CINEMA SURROUND You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. Cancel the function. Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO. -
Page 38: Dvd Menu
DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically. And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choose ON or OFF (Factory setting is ON). -
Page 39: Customized Setting
Customized setting You can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. MENU PICTURE menu VNR is turned off. AUTO Effect of VNR is automatically controlled. Effect of VNR becomes minimum level. Effect of VNR becomes maximum level. - Page 40 Customized setting (continued) VIDEO-2 SETTING You can set the VIDEO-2 SETTING according to the video signal output from external devices connected to the VIDEO-2 terminal. Select VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT). MENU INSTALL menu VIDEO If a normal video signal (composite video signal) is input.
-
Page 41: Tv Channel Presetting
TV channel presetting To register the TV channels automatically (AUTO PROGRAM) You can register the TV channels into the TV’s channel list automatically. Display the INSTALL menu. MENU INSTALL menu Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically. - Page 42 TV channel presetting (continued) To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu) You can edit the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be changed. Display the INSTALL menu. MENU INSTALL menu Choose EDIT/MANUAL, then press the MENU/OK button.
- Page 43 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 20, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc..
-
Page 44: Additional Preparation
Additional preparation The illustrations shown in this section are for AV-21BS26 and AV- 29SS26 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection. -
Page 45: Troubleshooting
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • No picture, no sound • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM”... -
Page 46: Specifi Cations
Specifi cations TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements For Australia: AC 220 to 240 V, 50 Hz / 60 Hz...