Fusion RX1600RAID Enclosure Specs and Features Mute Power Button Switch SAS Cable Connection SES Status Power Indicators Indicator Indicator Drive Activity (Blue) and Identification/Fault (Red) Indicator LEDs Figure 1 Power Cable Power Supply Fan Fault Fan Fault Connector Fault Indicator...
Page 3
Drive Usage: precautions explain the correct and safe use of this device, Sonnet Technologies has qualified specific hard drives for use in thereby helping to prevent injury to you or others, and also help Fusion RX1600RAID storage systems. These drives were chosen you to minimize the risk of damaging the device.
4. Repeat steps 2 and 3 for the remaining rail assembly. screw Figure 5 WARNING: The Fusion RX1600RAID enclosure is heavy without drives installed; do not install the drive modules until after you install the enclosure into the rack. B - Mount the Drive Enclosure Into Rack 1.
Page 5
D - Connect the Drive Enclosure to the Sonnet RAID Controller This section describes the connection of the Fusion RX1600RAID drive enclosure to the Sonnet RAID controller card. 1. Insert one end of each of the supplied data cables to the PRM LINK mini-SAS ports on the enclosure;...
Page 6
Figure 11 How to Connect Fusion RX1600RAID Expansion Systems This section explains how to connect Fusion RX1600RAID Expansion Systems to your system. Perform all steps listed here with your computer and Fusion storage systems powered off.
• If you remove a drive module from the Fusion RX1600RAID with a drive that was part of a RAID group, you should power off the enclosure before reinserting the module. Once the module is secured, power on the enclosure again;...
Need help?
Do you have a question about the Fusion RX1600RAID and is the answer not in the manual?
Questions and answers