Table of Contents
Advertisement
7. CLOCK FUNCTIONS
7.1 Clock functions
SYM-
BOL
• If you set a clock function, the symbol
flashes for approximately 5 seconds. In
these 5 seconds, touch
the time.
• If you set the time, the symbol contin-
ues to flash for approximately 5 sec-
onds. After these 5 seconds, the sym-
bol comes on. The time starts to count
down.
7.2 Setting the clock functions
1.
Switch on the appliance.
2.
Use
play shows the necessary clock func-
tion and the related symbol, for ex-
ample Minute Minder
3.
Use
time.
1
2
3
4
7
6
5
FUNCTION
Minute Minder
Duration
End
Time of day
or
again and again until the dis-
.
or
to set the necessary
Time of day
1
Duration
2
End
3
Minute Minder
4
Selection button
5
Setting button (Plus)
6
Setting button (Minus)
7
DESCRIPTION
To set a countdown (max. 99 minutes). This
function has no effect on the operation of the
appliance.
To set how long the appliance has to be in op-
eration.
To set the switch-off time for an oven function.
You can use Duration and End at the same
time, if the appliance is to be switched on and
off automatically later.
To set, change or control the time of day.
You can hear an acoustic signal for 2
minutes when the time is comple-
ted, "00.00" and the related function
to set
indicator flash. The appliance
switches off.
4.
Use any button to switch off the
acoustic signal.
With Minute Minder
must be switched on to set the
clock function.
With Duration
oven switches off automatically.
With Duration
you must set the oven function
and the temperature first, then
you can set the clock function.
ENGLISH
11
the oven
and End
the
and End
Advertisement
Table of Contents
