Charging the Battery Pack
Set the "STANDBY/ON
OFF" switch to "OFF".
Attach the battery pack.
Align the terminal of the
battery pack with this unit.
Either BATT.1 or BATT.2 can be charged.
If two battery packs are attached, BATT.1 is charged first. After the charging of
BATT.1 is completed, BATT.2 is charged. However, if BATT.1 is attached while
BATT.2 is being charged, BATT.1 will be charged after the charging of BATT.2 is
completed. Both battery packs cannot be charged at the same time.
.
The battery pack is not charged at the time of purchase.
0
To detach the battery pack, press the battery lock release button, and slide the battery
0
pack out of this unit.
8
.
Connect the DC connector and
plug in the power.
TT.1
BATT.2
REMOTE
AV
DC
Charging Lamp1, 2
Charging in progress:
Blinks
Charging finished:
Goes out