Rockford Fosgate PA2 Manual page 14

Standard Mounting
The PA2 can be installed in a variety of ways. For installations where mounting
brackets are needed, refer to the diagram below. If your dash or center console already
has provisions for a 1/2 DIN preamp, you may use alternative installation methods.
WARNING: DO NOT use bracket screws longer than 4mm into the PA2
• Attach brackets to preamp using supplied screws
• Position preamp in desired location (brackets are adjustable)
• If needed, make holes using mounting bracket as a template
• Secure to dash or center console using appropriate screws (not included)
ISO-DIN + 1/2 Mounting
The PA2 is also sized to fit import vehicles that accept DIN +1/2 configurations. Using
factory brackets or an installation kit, the PA2 can be coupled with standard DIN sized
radios (like the Rockford Fosgate RFX-8115 CD player) and installed in the dash or
center console.
NOTE: The faceplate may be
trimmed down on each side to
accommodate various trim
panels and installation kits.
– 10 –