ADJ Mega Bar 50 RGB RC User Instructions page 5

Mega Bar 50RGB RC
2. You will also have to link the power cords to each other, as you did
with the XLR cables.
3. Using the Master unit, choose your desired mode or program and
connect the "Slave" unit or units.
4. On the "Slave" unit(s) press the MODE button until "SLAV" is dis-
played. They will now follow the "Master" unit.
Static Color Mode:
In this mode you can choose a desired color to remain static.
1. Plug the fixture in and press the MODE button until "CO.XX" is dis-
played. "XX" = 0-32.
2. Press the UP or DOWN buttons to adjust "X" between 0-32.
Color Change Mode:
In this mode the Mega Bar 50RGB RC will change through the different
colors.
1. Plug the fixture in and press the MODE button until "JP.XX" is dis-
played. "XX" = 01-99 which is the adjustable rate of the speed change.
2. Press the UP or DOWN buttons to adjust the speed of the color
change.
Color Fade Mode:
In this mode the Mega Bar 50RGB RC will fade in and out of the different
colors.
1. Plug the fixture in and press the MODE button until "Fd.XX" is dis-
played. "XX" = 01-99 which is the adjustable rate of the speed change.
2. Press the UP or DOWN buttons to adjust the speed of the color
change.
Auto Mode:
1. Plug the fixture in and press the MODE button until "AUTO" is dis-
played. You are now in AUTO mode and the fixture will now cycle
through the color change and color fade.
Sound Active Mode:
In this mode the Mega Bar 50RGB RC will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until "SO.XX" is dis-
played. The fixture will now change color via sound.
2. You can press the UP or DOWN buttons to adjust the sound sensi-
tivity level. The level can be adjusted from "SO.00" the least sensitive,
to "SO.31" the most sensitive.
American DJ® - www.americandj.com - Mega Bar 50RGB RC Instruction Manual Page 9
©
Operating Instructions Mega Bar 50RGB RC
RGB Mode:
In this mode you can select either red, green, blue, or adjust the colors to
make a deisred color, which will remain static. You can adjust the inten-
sity of each color to make your desired color.
1. Plug the fixture in and press the MODE button until "drGb" is dis-
played, and press SETUP.
2. You can press the UP or DOWN buttons to adjust the intensity of the
displayed color. When you have adjusted your desired color press
SETUP to scroll to the next color.
DMX Mode:
There are seven DMX Modes to choose from: 1 Channels, 2 Channels, 3
Channels, 4 Channels, 5 Channels, 6 Channels, or 7 Channels. Operating
through a DMX controller give the user the freedom to create their own
programs tailored to their own individual needs.
1. This function will allow you to control each individual fixture's traits
with a Elation® DMX 512.
2. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller.
3. Press the MODE button until "d.XXX" is displayed. Press the UP or
DOWN buttons to select your desired address. Once you have set
your desired DMX address press the SETUP button to choose your
desired DMX mode.
4. When you press the SETUP button "CH-X" should be displayed. "X"
represents the DMX Channel mode. Press the UP or DOWN buttons
to select your desired DMX Channel mode. Press the SETUP button
again once you have found your desired DMX Channel mode.
5. Please see pages 13-16 for DMX values and traits.
ADJ LED RC:
This function is used to activate and deactivate the ADJ LED RC (Remote
Control). When this function is activated you can control the fixture using
the ADJ LED RC. Please see the next page for ADJ LED RC controls and
functions.
1. Plug the fixture in and press the MODE button until "Ir.XX" is dis-
played. "XX" represents either "on" or "oF" (Off).
2. Press the UP or DOWN buttons to either activate the remote function
(On) or deactivate (Off).
American DJ® - www.americandj.com - Mega Bar 50RGB RC Instruction Manual Page 10
©
Operating Instructions