Adding Phonebook Entries - ClearSounds iConnect A6BT Operating Manual

Note: When entering the same letter twice or a different letter
with same key, wait for a few seconds for the cursor to move
automatically and then select the next letter.

Adding Phonebook Entries

█
1. Press the Menu soft key to display the main menu list.
2. Press down
the Select soft key.
3. Press the Select soft key to select New.
4. The display shows "Name?". Enter the name you want
to use and then press the Save soft key to confirm. The
display shows "Number?". Enter the desired number
(up to 24 digits) and then press the Save soft key.
5. Press up
Melody 10 and then press the Select soft key. If you
want to set a VIP number, you should select a special
Melody ring tone for it. This ring tone should be different
than the EXT Ring tone you have set.
6. Repeat if necessary.
NOTE: If you make a mistake while entering a name or a
number, use the Erase soft key to correct it. Each time you
press this key, the last digit is deleted. To clear all digits,
press and hold the Erase soft key.
to choose Phonebook and then press
or down
39 – ENGLISH
to select from Melody 1 –