Answering A Call - ClearSounds iConnect A6BT Operating Manual

Using your Phone with Hearing Aids and
█
Cochlear Implants
Your phone can be used with hearing aids and cochlear implants
equipped with a telecoil (T-coil). Adjust your hearing aid
"T-switch" to the "T" position. Make sure to hold the handset
close to your T-coil.
Using the Hands-Free Headset Jack
█
Your phone is equipped with a Phone Headset jack (located on
the left side of the handset), providing flexibility and multi-
functionality. This jack is amplified, allowing you to adjust
both the tone and volume the same as you would through the
handset or speakerphone.
By using this jack, you can listen and speak through your hands-
free headset. This 2.5mm phone headset jack accommodates a
variety of optional hands-free accessories including neckloops,
headphones, silhouettes, and cellular accessories.
NOTE: When a 2.5mm audio device is plugged in, the incoming
audio signal to the handset will now be transferred to the
headset jack. No output on the handset will be heard. As soon
as you plug your headset into the jack, it will be activated.
NOTE: For instructions regarding setting up a Bluetooth
wireless headset, see page 42.

Answering a Call

█
Note: If you pair and connect your handset to a Bluetooth
wireless headset according to the instructions on page 42, you
can answer or make a call using
through your wireless headset.
, and then speak and listen
23 – ENGLISH