ClearSounds A600 DECT 6.0 Quick Start Manual page 2

PARTS CHECKLIST
PHONE BASE CORDLESS HANDSET
BATTERIES PHONE LINE CORDS
CARRYING CLIP
AC ADAPTER USER'S MANUAL
REGISTERING ADDITIONAL HANDSETS
The supplied handset is already registered to the base unit,
and you can register up to 4 additional handsets to the base.
1. Before registering an additional handset to the base, you
should press and hold the page key
on the main base, for about 5 seconds and then release it.
2. Press the Menu soft key on the handset you are registering
to display the main menu list.
3. Press up or down to scroll to Registration and then
press the Select soft key.
4. Press up or down to scroll through the base list and
select one of the bases and then press the Select soft key.
The handset will search for the requested base.
5. If the handset is successfully registered, you will be
prompted to enter the PIN code (the default PIN is 0000).
Upon validation of the PIN, the Registration tone will sound
and the base assigns a number to the handset.
More information on this feature located in the Operating
Manual on page 19.
1. CHECK PARTS LIST
2. PHONE INSTALLATION: The phone should be located in
an area where it is easy to see the visual display and lighted
ringer. The phone may be placed on a shelf or table or may
be fixed to the wall using the wall mounting bracket. Begin
by removing the clear plastic Caller ID protective tab. This
film tab is only for display and to protect your Caller ID
display during shipping.
Desk / Table Mounting
1. Connect one end of the 6 ft phone cord to the line jack on
the back of the base and connect the other end to a modular
phone jack.
2. Plug the AC power adapter into the jack on the back of the
base, then plug the AC adapter into a standard electrical
BRACKET
outlet or surge protector.
NOTE: The adapter is required for the phone to work.
Caller ID
Your ClearSounds
Talking Caller ID Mode set to ON and will announce the caller's
number between rings. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
press the Select soft key.
4. Press up
, which is located
deactivate the Talking Caller ID function and then press
the Save soft key.
Dialing from the Memory M1 – M4 and SOS keys
Press one of the M1 – M4 or SOS memory dial keys and the
phone will automatically begin to dial (Page 30 of the Operating
Manual describes how to program the memory dial keys).
If at any time you have questions about your
telephone after reading this manual, please
contact our ClearSounds
CONNECTING YOUR PHONE
TALKING SETTING
A600 comes from the factory preset for
®
or down to scroll to HS Settings and
or down to scroll to Talk CID and then
or down to select On or Off to activate/
MEMORY KEYS
® Customer Service
Department at 1-800-965-9043.
LOCATION OF CONTROLS
1
16 2
15
3
14
4
13
5
12
6
11
7
10 8
9
Figure 1
1 Visual Phone Ringer & 11 Lighted Keypad
Amplify Indicator Light 12 Dial/Speakerphone Key
2 (4) 1-Touch Memory Dial Keys 13 Left/Intercom Key
3 Large LCD/Caller ID Screen 14 Left Soft Key
4 Right Soft Key 15 Up/Caller ID Key
5 Right/Redial Key 16 Earpiece
6 End Key 17 Carrying Clip
7 Down/Phonebook Key 18 Speaker
19 Battery Compartment Cover
8 Hash (Pound) Key
20 Charging Contacts
9 Microphone
10 Star Key
TELEPHONE ANSWERING MACHINE (TAM) OPERATION
Method 1: Using the Handset
1. Press the TAM soft key to display the TAM main menu
list.
2. Press down to scroll to TAM Setting and then press
the Select soft key.
3. Press the Select soft key to select TAM On/Off.
4. Press up or down to select Off or On and then
press the Select soft key.
Method 2: Using the Base
1. With power coming to the base, press the
the base to turn the answering machine Off or On. The
base will announce the selected mode.
17
18
19
20
key on