Netgear Vpn Configuration Fvs318 Or Fvm318 To Fvl328; Configuration Template - NETGEAR FVL328 Reference Manual

This appendix provides a case study on how to configure a secure IPSec VPN tunnel between a
NETGEAR FVS318 or FVM318 to a FVL328v2. The configuration options and screens for the
FVS318 and FVM318 are the same.

Configuration Template

The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
Table F-1. Summary
VPN Consortium Scenario:
Type of VPN
Security Scheme:
Date Tested:
Model/Firmware Tested:
NETGEAR-Gateway A
NETGEAR-Gateway B
IP Addressing:
NETGEAR-Gateway A
NETGEAR-Gateway B

NETGEAR VPN Configuration FVS318 or FVM318 to FVL328

NETGEAR VPN Configuration
FVS318 or FVM318 to FVL328
Scenario 1
LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway)
IKE with Preshared Secret/Key (not Certificate-based)
December 2003
FVS318 firmware version A1.4 or FVM318 firmware version 1.1
FVL328 with firmware version 1.5 Release 07
Static IP address
Static IP address
M-10144-01
Appendix F
F-1