How To Configure Reserved Ip Addresses; Configuring Wan Settings - NETGEAR FVL328 Reference Manual

Model FVL328 ProSafe High-Speed VPN Firewall v2 Reference Manual
Enter the LAN TCP/IP and DHCP parameters.
3.
Click Apply to save your changes.
4.

How to Configure Reserved IP Addresses

When you specify a reserved IP address for a PC on the LAN, that PC will always receive the
same IP address each time it accesses the firewall's DHCP server. Reserved IP addresses should be
assigned to servers that require permanent IP settings.
To reserve an IP address:
Click the Add button.
1.
In the IP Address box, type the IP address to assign to the PC or server.
2.
Choose an IP address from the router's LAN subnet, such as 192.168.0.X.
Type the MAC Address of the PC or server.
3.
Note: If the PC is already present on your network, you can copy its MAC address from the
Attached Devices menu and paste it here.
Click Apply to enter the reserved address into the table.
4.
Note: The reserved address will not be assigned until the next time the PC contacts the router's
DHCP server. Reboot the PC or access its IP configuration and force a DHCP release and
renew.
To edit or delete a reserved address entry:
Click the button next to the reserved address you want to edit or delete.
1.
Click Edit or Delete.
2.

Configuring WAN Settings

The WAN Setup menu allows configuration of WAN services such as automatic connection, DMZ
server, enabling diagnostic PING tests on the WAN interface, setting the MTU size, and the WAN
port speed,. These features can be found under the Advanced WAN Setup heading in the Main
Menu of the browser interface.
These features are discussed below.
4-4
M-10144-01
WAN and LAN Configuration