NETGEAR FVL328 Reference Manual page 29

Connect the Ethernet cable (A) from your cable or DSL modem to the FVL328's Internet
c.
port.
Figure 3-2: Connect the cable or DSL modem to the firewall
Connect the Ethernet cable (B) which came with the firewall from a Local port on the
d.
router to your computer.
Figure 3-3: Connect the computers on your network to the firewall
Note: The FVL328 Firewall incorporates Auto Uplink
will automatically sense whether the cable plugged into the port should have a 'normal'
connection (e.g. connecting to a PC) or an 'uplink' connection (e.g. connecting to a switch
or hub). That port will then configure itself to the correct configuration. This feature also
eliminates the need to worry about crossover cables, as Auto Uplink will accommodate
either type of cable to make the right connection.
Turn on the cable or DSL modem and wait about 30 seconds for the lights to stop blinking.
e.
Connecting the FVL328 to the Internet
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual
A
LO CA L
1 0 / 1 0 0 M
8 7 6 5 4 3 2 2 1
B
LO CA L
1 0 / 1 0 0 M
8 7 6 5 4 3 2 2 1
M-10144-01
Cable or
DSL modem
IN TER N ET 1 2 V D C O . 5 A
Cable or
DSL modem
IN TER N ET
1 2 V D C O . 5 A
TM technology. Each Ethernet port
3-5