Table of Contents
Advertisement
Attach the Swivel-type Clip
Attach the swivel-type belt clip as described in the illustration below.
Easy Replacement
Easy replacement can be used if a handset needs to be replaced. The easy replacement
procedure is done via the handset display and the 5607 Programmer, or the rack charger.
Note: If the electrical connection is damaged, it is not possible to follow the Easy
Replacement procedure. Depending on fault, it might work to do a replacement via
PDM/WSM. See the Mitel 5603 Wireless Handset Configuration Manual.
The easy replacement procedure is done via the handset display and the 5603/4 Programmer
or the 5603/4 Rack Charger.
The following settings are replaced during easy replacement:
•
DECT registration
•
User options (including User ID)
•
Contacts
•
The extension number is assigned to the new handset
The following settings are not replaced during the easy replacement:
•
Call list
Before Starting Easy Replacement Procedure
1. Check that both the old handset (that is, the handset to be replaced) and the new handset
(that is, the replacement handset) are of the same device type (5603).
Figure 1.
Figure 10: Attach the Swivel-type Clip into Position
Maintenance
45
Advertisement
Table of Contents
