Maintenance; Maintenance Of Batteries; Battery Warnings; Charge The Battery - Denwa Communications Mitel 5603 User Manual

Wireless handset
Table of Contents

Advertisement

Maintenance

Maintenance of Batteries

Battery Warnings

The "Low battery" icon appears when the battery has 10% or less remaining
capacity left. In addition; a warning signal sounds every minute, the LED
flashing orange, and the window "Battery low. Charge now." appears.
The "Empty battery" icon is flashing when the battery has 5% or less remaining
capacity left. In addition; a warning signal sounds every second, the LED
flashing red, and the window "Battery empty. Shutting down." appears.
During a call, only the corresponding battery warning signal will notify the user. The warning
signal cannot be silenced during a call. When not in call, the warning signal can be silenced
by pressing

Charge the Battery

Place the handset in the desktop charger or in the rack charger. The battery is being charged
when the LED on the handset is steady orange. When the battery is fully charged the LED will
be green.
An animated battery icon
its current charge and ending with the full charge. A filled battery icon
charged battery.
Note: Only use the prescribed chargers for charging.

Replace the Battery

If the standby time for the handset becomes too low, the battery should be replaced by a new
one. Please contact your system administrator or your supplier, for information about new
batteries. Attach the battery as described in the illustration below. The battery is easy to replace.
It is attached inside the battery lid and is connected to the handset in such a way that no
miss-contact is possible.
.
is also shown in the display indicating charging by starting with
Maintenance
indicates a fully
43

Advertisement

Table of Contents
loading

Related Products for Denwa Communications Mitel 5603

Table of Contents