2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
AC/DC Adapter
VGA (optional)
Note
Use only the AC/DC adapter model:
Philips ADS-65LSI-19-1 19065G
1. Place the monitor face down on a soft
2. Hold the stand with both hands.
HDMI (optional)
4
Install base stand
and smooth surface to avoid scratching or
damaging the screen.
(1) Gently attach the stand to the VESA
mount area until the latch locks the
stand.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the stand tightly.
2
1