DC power cord for normal operation. notes regarding the operation of your monitor. • Please use approved power cord provided by Philips all the time. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for...
Page 4
1. Important screen for a constant period of time • If your monitor gets wet, wipe it with by : dry cloth as soon as possible. • Looking at something varying • If foreign substance or water gets in distances after a long period your monitor, please turn the power focusing on the screen.
1. Important that will not disappear and cannot be 1.2 Notational Descriptions repaired. The damage mentioned above The following subsections describe is not covered under your warranty. notational conventions used in this Service document. • The casing cover should be opened Notes, Cautions and Warnings only by qualified service personnel.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or on entails participation in national take-...
Top Victory Investments Ltd. or one of its a liates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.
2. Setting up the monitor Connecting to your computer 2.2 Operating the monitor Description of the control buttons AC/DC power input Earphone jack Audio input Press more than 3 seconds VGA input to switch display power OFF. Press to switch display Display port 1(Support 1.1&1.2) input power ON.
Page 9
On-Screen Display. You can use On-Screen Display (OSD) is a feature in this as a reference when you want to all Philips LCD monitors. It allows an end work your way around the different user to adjust screen performance or adjustments later on.
Page 10
2. Setting up the monitor Resolution notification Main menu Sub menu Ambiglow Bright, Brighter, Brightest Ambiglow This monitor is designed for optimal Bright, Brighter, Brightest Auto Mode performance at its native resolution, User De ne White, Red,Rose,Magenta,Violet, Blue,Azure,Cyan,Aquamarine,Green, 2560 × 1440 @ 60 Hz. When the monitor Chartreuse,Yellow,Orange 1,2,3 LowBlue...
2. Setting up the monitor 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the Display base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface.
There are 7 modes to select: FPS, in real time. Whether you're working Racing, RTS, Gamer1, Gamer2, LowBlue with text applications, displaying images Mode and Off. or watching a video, Philips SmartImage delivers great optimized monitor SmartImage GAME performance. Why do I need it?
Unique technology that dynamically time. Developed for wellbeing, analyzes displayed content and Philips LowBlue Mode setting uses a automatically optimizes a Monitor's smart software technology to reduce contrast ratio for maximum visual clarity harmful shortwave blue light.
Ambiglow adds a new dimension to your viewing experience. This patented Philips technology uses two rows of bright LED’s projecting a glow of light on the bottom of the display. The innovative Ambiglow processor ...
6. Technical Specifications 6. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size 27" W (68.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.233 x 0.233 mm SmartContrast 50,000,000:1 Optimum Resolution 2560x1440 @ 144Hz Viewing Angle 178° (H) / 178° (V)(typ.) @ C/R > 10 Picture Enhancement SmartImage Vertical Refresh Rate...
Page 17
6. Technical Specifications Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC, 50Hz Normal Operation 40.44 W (typ.) 40.54 W (typ.) 40.64 W (typ.) Sleep (Standby) <0.5 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.3 W (typ.)
Page 18
100 % PVC BFR free housing Cabinet Color Black Finish Glossy Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. NTSC Area based on CIE1976, sRGB Area based on CIE 1931...
6. Technical Specifications Note 6.1 Resolution & Preset Modes • Please notice that your display Maximum Resolution works best at native resolution 2560x1440@144Hz (HDMI 2.0/DP1.1/ of 2560 x 1440@ 60Hz. For best DP1.2) display quality, please follow this 2560x1440@75Hz (HDMI 1.4) resolution recommendation.
7. Power Management 7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
8.1 Philips’ Flat Panel Monitors single black pixel. Other combinations Pixel Defect Policy of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the Types of Pixel Defects...
Page 22
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 23
8. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
If the problem • Disconnect the monitor from mains still persists after you have tried these power source immediately for safety solutions, contact Philips customer • Contact with Philips customer service representative. service representative immediately. Common Problems Imaging Problems...
Service contact information listed in • Restart your computer and repeat Important information manual and step 2 and 3 to verify that your PC is contact Philips customer service set at 2560 x 1440 @ 60 Hz. representative. • Shut down your computer,...
Page 27
For extensive cleaning, PC, workstation or Mac? please use isopropyl alcohol. Do not use other solvents such as Ans.: Yes. All Philips monitors are fully ethyl alcohol, ethanol, acetone, compatible with standard PCs, Macs and workstations. You may hexane, etc.
Page 28
EDFU? Image in monitor panels? Ans.: Important Information manual Ans.: Uninterrupted display of still or can be download on the Philips static images over an extended website support page. period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen.
Page 29
Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.