Getting Started; Carton Components - Brother HL-2140 Quick Setup Manual

1

Carton Components

1
Carton components may vary from one country to another.
Save all packing materials and the printer carton in case for any reason you must ship your printer.
1 Face-down output tray support flap 1 (Support flap 1)
2 Control panel
3 Manual feed paper guide
4 Manual feed slot
5 Manual feed slot cover
CD-ROM
(including User's Guide
and Network User's Guide)
The Network interface cable is not standard accessories. Please purchase them, if you intend to use.
USB cable
• Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters).
• Your printer has a USB interface that is compatible with the USB 2.0 specification. This interface is also
compatible with Hi-Speed USB 2.0; however, maximum data transfer rate will be 12 Mbits/s. The printer can
also be connected to a computer that has a USB 1.1 interface.
• DO NOT connect the interface cable at this time. Connecting the interface cable is done during the printer
driver installation process.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB
port on a keyboard or non-powered USB hub.
Network cable (For HL-2150N users)
• Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
1
2
3
4
5
Quick Setup Guide
Drum unit and toner
cartridge assembly
10
9
8
7
6
6 Paper tray
7 Front cover
8 Power switch
9 Ventilation hole
10 Face-down output tray
AC power cord

Getting Started

AC power cord
5