Getting Started; Carton Components - Brother DCP-9040CN Quick Setup Manual

Getting Started

1

Carton components

1
Carton components may vary from one country to another.
Save all packing materials and the carton in case for any reason you must ship your printer.
1 Automatic Document Feeder (ADF)
2 Control Panel
3 Front Cover Release Button
4 Front Cover
5 Paper Tray
CD-ROMs
For Windows
For Macintosh
AC Power Cord
Toner cartridges (Black, Cyan, Magenta and Yellow)
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface
you intend to use (USB or Network). DO NOT connect the interface cable at this time. Connecting the interface
cable is done during the software installation process.
USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 2 metres. When you use a USB
cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard or non-
powered USB hub.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
6
1
2
3
4
5
®
®
Quick Setup Guide
Insertion Sheet and Plastic
bag for repacking
9
8
7
6
10
6 Power Switch
7 ADF Document Output Support Flap
8 Document Cover
9 Face-down Output Tray Support
10 Multi-purpose tray (MP tray)
Belt Unit (pre-installed)
Waste Toner Box (pre-installed)
Drum Unit (pre-installed)