When The Error Log Is Displayed - Panasonic WJ-ND200 Operating Instructions Manual

When the Error Log is Displayed

Do the following when the error log is displayed. Contact the dealer when an unlisted error occurred.
Error Log
W-ERR d
R-ERR d
SKIP d
SMART d
H.METER d
REMOVE d
HDD-**- or HDD-FULL
CAM cc ERR
LINK_ERR
CAMERA cc SD ERROR
CAM cc SD START ERR
CAM cc SD END ERR
CAM cc GET LIST ERR
CAM cc GET IMG ERR
CAM cc DEL IMG ERR
HDDd FORMAT-ERR
M-FORMAT ERR
M-FAILd
*: The HDD should be replaced by/purchased from the qualified service personnel or system installers.
Parameter in the logs above
Parameter Description
f FAN number
d Disk number
cc Camera number
Description
Failed to write/read data on the HDD. The
HDD may be malfunctioning.
The HDD may be malfunctioning and may
work incorrectly.
The set time for the hour meter has
passed. It may be reaching the end of the
HDD's lifetime.
The HDD has been unmounted from the
system automatically.
The HDD is almost full or completely full.
Communication with the network camera is
unstable, or no network camera is connect-
ed.
The unit is disconnected from the network.
An SD card memory error occurred.
The SD memory card may be not detected,
or there is no available space on the SD
memory card on the camera.
An SD card memory error occurred.
Communication with the network camera is
unstable, or no network camera is connect-
ed.
The HDD may be malfunctioning, or may
be not inserted correctly and firmly.
Failed to recover data using the mirroring
function.
The HDD may be malfunctioning.
Detail
1-2: FAN number (FAN1-FAN2)
1-2: Disk number (HDD1-HDD2) 5: Others
01-16: Camera number
Solution
If this error occurs frequently, contact the
dealer to replace the HDD*.
Contact the dealer to replace the HDD*.
Contact the dealer to replace the HDD*.
Contact the dealer. After replacing the
faulty disk*, the error status will be can-
celed.
Format or replace the HDD*.
Check the communication status between
this unit and the network camera.
Check the network connection.
Check the SD memory card and the set-
tings on the camera.
Check the SD memory card and the set-
tings on the camera.
Check the communication status between
this unit and the network camera.
Remove and mount the hard disk drive
again by following the instructions of how
to mount/remove the hard disk drive, and
then format it.
If this error occurs frequently, contact the
dealer to replace the HDD*.
Contact the dealer to replace the HDD*.
61