About The Error Log - Panasonic WJ-ND300 Operating Instructions Manual

About the Error Log

The following are the descriptions about the contents of the error log and the network error log.
Content Error Log
Power outage PWR LOSS
detection
Recover from a PWR RECOVER
power outage
Fan warning FAN u-f
Thermal error THERMAL u-1
warning
Extension mode –
settings error
HDD Write error W-ERR u-d
HDD Read error R-ERR u-d
RAID 1 down HDu-d 1DOWN
RAID 2 down HDu 2DOWN
Disk array change –
HDD S.M.A.R.T. SMART u-d
warning
HDD hour meter H.METER u-d
warning
Volume Error V-ERROR vvv
HDD SKIP SKIP HDD u-d
1
warning *
Remove auto REMOVE u-d
links
HDD RAID5 R-FAIL u
EVENT area EVT-**%
available capacity
warning
EVENT area EVT-FULL
available capacity
warning (FULL)
COPY area CPY-**%
available capacity
warning
COPY area CPY-FULL
available capacity
warning (FULL)
Copy error NO DATA CPY
HDD RAID board
initialization
failure
Network link error –
*1: "HDD SKIP" is the function that continues recording even when an error occurs, such as an HDD write error, by
recording images on the next HDD.
Network log
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
LINK-ERRn
Indication on Output from the connec-
the LED tor on the rear panel
SYS-1 ERR –
POWER FAILURE
– –
FAN-1-u-f ERR Error output
FAN ERROR
TML-1-u-1 ERR Error output
THERMAL ERROR
SYS-2 SINGLE –
MIX ERROR
– –
– –
– HDD error output
– HDD error output
Please Setup on –
DISK CONFIG MENU
HDD-1-u-d ERR HDD error output
HDD WARNING
HDD-2-u-d ERR HDD error output
HDD HOUR METER
– HDD error output
– HDD error output
HDD-3-u ERR HDD error output
HDD REMOVED
HDD-4-u ERR HDD error output
RAID5 RECOVERY
– Copy/event recording
area available capacity
warning output
HDD-5 ERR Copy/event recording
EVENT-HDD FULL area available capacity
warning output
– Copy/event recording
area available capacity
warning output
HDD-6 ERR Copy/event recording
COPY-HDD FULL area available capacity
warning output
– –
HDD-9 ERR
RAID INITIAL ERR
NET-1-n ERR Network error output
NW LINK ERROR
49