Obtain Images On An Sd Memory Card - Panasonic WJ-ND200 Operating Instructions Manual

Obtain Images on an SD memory card

Images recorded on the SD memory card on the camera can be obtained as follows.
Refer to the setup instructions (PDF) for further information about the SD memory card recording and for how to set
the recording rate for the SD memory card recording.
Screenshot 1
When the SD memory card on the connected camera
contains recorded images, the SD memory data obtain
button (SD in red) will be displayed in the [REC] box.
Screenshot 2
The confirmation window will be displayed.
44
Step 1
Click the SD memory data obtain button.
Important:
• The SD memory data obtain button can be clicked
by only users for whom the "SD MEMORY REC"
checkbox is checked on the "User Level" page
("User Mng." – "User Level" – "SD MEMORY REC").
• SD memory data cannot be obtained when the
emergency recording is being performed.
• When the recording rate for "SD MEMORY REC" is
not set, the SD memory obtain button will not be dis-
played.
Notes:
• The letters "SD" on the SD memory data obtain but-
ton will be displayed in blue when there is no record-
ed image on the SD memory card.
• When the SD memory data obtain button is clicked
while the letters "SD" are displayed in blue, the unit
will check if there is any recorded image on the SD
memory card or not. When a recorded image is
found, the letters "SD" on the SD memory data
obtain button will turn red.
Step 2
Click the [OK] button.
Important:
When obtaining the SD memory data starts, all
users will forcibly be logged out and all recordings
currently being performed will stop.