Legal notices........... .13 90-day limited warranty - Insignia .......14 Introduction Congratulations on your purchase of a high-quality Insignia product.
Insignia NS-CLOPP1 Digital Clock Radio with FM Important safety instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth.
Insignia NS-CLOPP1 Digital Clock Radio with FM Features Top buttons Preset SNOOZE / DIMMER Sleep Source Item Description Preset button Press to program a radio station preset or to tune to a preset radio station. See “Programming a radio station preset” on page 12 or “Tuning to a preset radio station”...
Insignia NS-CLOPP1 Digital Clock Radio with FM Item Description (volume down) button Press to decrease the volume. (volume up) button Press to increase the volume. Back 0.7A Item Description DC IN jack Connect the AC/DC power adapter to this the jack. See “Connecting the AC/DC power adapter”...
Insignia NS-CLOPP1 Digital Clock Radio with FM 12:08 Volume Preset AUX FM SLEEP Buzzer Buzzer SNOOZE 1 Radio 2 Radio Icon Description Preset When you are programming a radio station preset, “Preset” and the preset number (P-01 through P-10) appear in the center of the LCD. See “Programming a radio station preset”...
Insignia NS-CLOPP1 Digital Clock Radio with FM Package contents • Digital clock radio with FM • AC/DC power adapter • Quick Setup Guide • User Guide Setting up your radio Installing backup batteries The backup batteries provide power to backup the time setting when you unplug the AC/DC power adapter.
Insignia NS-CLOPP1 Digital Clock Radio with FM 3 Insert the tab on the battery compartment cover into the slot on the battery compartment, then press the cover down until it clicks into place. Connecting the AC/DC power adapter If you unplug the AC/DC power adapter and the backup batteries are dead or not installed, the time setting is lost.
Insignia NS-CLOPP1 Digital Clock Radio with FM Setting the alarm sound Your radio has two alarms and can play the buzzer or the radio for the alarm sound. You can use the same alarm sound for both alarms or set one alarm to use the buzzer and the other alarm to use the radio.
Insignia NS-CLOPP1 Digital Clock Radio with FM 4 Press to increase the minutes or press to decrease the minutes. 5 Press (Alarm 1) or (Alarm 2) again. The Volume icon appears on the LCD and the volume digits blink. 6 Press to increase the alarm volume or press decrease the alarm volume.
Insignia NS-CLOPP1 Digital Clock Radio with FM Adjusting the LCD brightness When you adjust the LCD brightness, your radio retains the setting and uses this setting the next time you turn on your radio. To adjust the LCD brightness: 1 Quickly press repeatedly to select a brightness level.
Insignia NS-CLOPP1 Digital Clock Radio with FM Programming a radio station preset A radio station preset lets you assign a preset number to a radio station to make it easier to tune to a station. You can program 10 presets.
Insignia NS-CLOPP1 Digital Clock Radio with FM Specifications Total RMS power 2 W @1kHz, @ 10% THD Total peak power ≥ 65dB Signal-to-noise ratio Frequency response 300Hz - 20kHz Speakers 2 × 40 mm Batteries 2 AAA Dimensions (W × D × H) 9.8 ×...
Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts.
Need help?
Do you have a question about the NS-CLOPP1 and is the answer not in the manual?
Questions and answers