Use Of Your Appliance; The Control Panel; Programme Selector; Temperature Selector - Zanussi TL493 Instruction Book

The control panel

Never turn the programme selector when the appliance is working.
2
1 3
1 ON/OFF pushbutton "
Press the ON/OFF pushbutton, the programme
starts : the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is
working (on/off pushbutton " " pressed). It lights
off when the cycle is finished (programme selector
on a stop position "I").
3 Half load pushbutton "
This pushbutton allows to wash small quantity of
linen not much soiled (2,0 kg) only on the cotton
programmes.

4 Rinse hold pushbutton "

Press this button to leave the water in the drum
after the wash cycle is completed. This works only
on synthetics, wool and delicate programmes.
The clothes are left suspended in water after the
final rinse to prevent the formation of creases.
You can end these programmes by a draining by
depressing this pushbutton or select the pro-
gramme G for a spinning phase (with the on/off
" "
pushbutton pressed out).

USE OF YOUR APPLIANCE

4
"
"
"
C
5

5 Programme selector

It enables to select the most adapted programme
to the nature and degreees of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each pro-
gramme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a position off "I" or on a position
rinse hold " ".
Never turn the programme selector
anticlockwise.

6 Temperature selector

It enables to choose the mosta adapted temperature
between cold ( ) and 90°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indica-
tions or the programme table, according to the
fibers and the fastness of the colours.
TL 493
30
6
25