Select The Delay Start; Start The Programme - Zanussi ZKF 220 User Manual

Table of Contents

Advertisement

132900571.qxd
11/05/2004
10:55

7. Select the DELAY START

Before you start the programme, if you wish the
starting to be delayed, press the DELAY START
button repeatedly, or keep it pressed, to select the
desired delay. The selected delay time value (up to
24 hours) will appear on the display for 3 seconds,
then the duration of the programme will appear
again.
During this period it is possible to load other laundry:
• depress START/PAUSE button;
• load the laundry;
• close the door and depress START/PAUSE button
again

8. Start the programme

Press the START/PAUSE button. The relevant light
will stop flashing, and only the light relevant to the
phase that is in progress will remain lit.
If you have chosen a delayed start, the machine will
begin the countdown.
The display will show the duration of the programme
or the selected delay.
If the DELAY START option has been selected,
the machine begins the countdown. The display
shows the duration of the programme or the
delayed time.
Pagina
20
20
9. How to change a programme
during its cycle
Before you make any change, you must cancel the
programme which is running turning the programme
selector on position O.
Select the the new programme and then depress the
START/PAUSE.
The water of the washing will not be drained.
10. How to open the door during
the cycle of a programme
You can open the door, after having set the machine
to PAUSE, provided the following conditions exist:
• the machine is not in the heating phase beyond
55°C;
• the level of the water is not high;
• the drum is not turning.
If these requirements are met, when you pause the
machine, the door can be opened.
Should it not be possible to open the door, and
should it be absolutely necessary to do so, switch
the machine off turning the programme selector to
position O.
After approximately 3 minutes, you can open the
door.
Pay attention to the level and temperature of the
water in the machine!
Select the programme again and depress the
START/PAUSE button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents