Zanussi ZKF 220 User Manual page 12

132900571.qxd 11/05/2004 10:54
10 Display
The display shows the following information:
Cancelling – Duration of the programme –
Delayed start – Incorrect option selection –
Alarm code – End of programme.
If a programme has been cancelled – programme
selector dial on position O – display and all the lights
are off.
Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes (for example 2.05).
The duration is calculated automatically on the basis
of the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining
is updated every minute.
The drying time is displayed in hours and minutes or
only minutes.
After the programme has started, the time remaining
is updated every minute.
Pagina 12
Start
Drying time
Delayed start
The selected delay (24 hours max) set by means of
the relevant button appears on the display 3
seconds, then the duration of the previously selected
programme is displayed.
The countdown is updated every hour.
Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed
for 2 seconds.
Alarm codes
In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
paragraph "Something not working").
12