The Control Panel - Zanussi TL1000 Instruction Manual

THE CONTROL PANEL

Never turn the programme selector when the appliance is working.
1000
500
1 2 3 4 5
1 ON/OFF Button
To start the machine, press the ON/OFF button.
The pilot light will come on.
To switch off the machine, release the button by
pressing it again.
2 Pilot Light
This light will come on when the machine starts
operating and goes out when the ON/OFF
button is released.
3 Half Load Button
Select this option to reduce the water
consumption on the rinse cycle when washing
smaller loads of cottons/linens. (Maximum load
size of 2.5 kg). This option cannot be used on
synthetic and delicate wash programmes.
4 Rinse Hold Button
Press this button to leave the water in the drum
when the wash cycle has finished.
This option is available on synthetic and delicate
wash programmes (H to K and N-R). The
garments are left suspended in water after the
final rinse which helps to prevent creasing.
Do not use rinse and hold with the wool pro-
gramme. Wool should be gently spin.
6
C
6
7
When it is convenient to empty the machine,
press this button again or select a drain or short
spin programme.
Ensure the ON/OFF button is in the off position
before turning the dial.
5 Spin Speed Reduction Button
Press this button to reduce the spin speed on
cotton/linen programmes from 1000 to 500 rpm.
6 Programme Selector Dial
To select the required programme, turn the dial
in a clockwise direction until the programme
required is shown in the display window (7).
Do not turn the programme selector
anticlockwise (to the left).
Ensure the ON/OFF button is in the OFF
position when selecting a programme.
7 Display Window
TL 1000