For The Installer; Warnings; Technical Characteristics - Zanussi TE 862 V Instruction Manual

B. FOR THE INSTALLER

1. WARNINGS

• This washing machine is heavy. Take care when
moving it.
• You must remove the packing on the washing
machine before use. Failure to remove all transport
protection devices can cause damage to the
washing machine or nearby furniture. The washing
machine must be unplugged while packing is being
removed.
• Do not allow any one other than a qualified plumber
to make the hydraulic connections necessary to
install your washing machine.
• The washing machine must be plugged in to a
power outlet with a conform earth.
• Call a qualified electrician if the electrical installa-
tion in your residence is such that you have to
modify it before you can connect your washing
machine.

2. TECHNICAL CHARACTERISTICS

DIMENSIONS
VOLTAGE / FREQUENCY
TOTAL POWER
WATER PRESSURE
Connection to the water network
This washing machine complies with CEE directive 89-336 about the limitation of radioelectric disturbances
and directive CEE 73-23 for electrical safety.
•
•
•
•
•
Height
Width
Depth
Minimum
Maximum
13
Please read the instructions in the "electrical con-
nections" chapter carefully before connecting your
washing machine.
After installing your washing machine, make sure
that it is not standing on its electrical power supply
cable.
When your machine is installed on a carpeted floor,
make sure that the carpet does not close off the
ventilation openings near the bottom of the
machine.
The power supply cable may be only replaced by
the After Sales Service.
Your manufacturer cannot be held responsible for
any damage resulting from a nonconform installa-
tion.
850 mm
397 mm
600 mm
230 V / 50 Hz
2300 W
0,05 MPa (0,5 bar)
0,8 MPa (8 bars)
Type 20x27