Log; Packet Data; Monitor All Communication Events; Call Timers - Nokia N73 User Manual

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select
Recent calls. The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press

Call timers

To monitor the approximate duration of your incoming and
outgoing calls, press , and select
Call timers.
To set the display of the call timers while a call is active,
select Applications > Log >
call duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
For this you need the lock code. See "Phone and SIM,"
p. 102.
Applications > Log
Options > Clear recent
.
Applications > Log
Options > Settings > Show
Options > Clear timers.

Packet data

To check the amount of data sent and received during packet
data connections, press
Packet data. For example, you may be charged for your packet
>
data connections by the amount of data sent and received.

Monitor all communication events

Icons in Log:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text
messages, or data connections
registered by the device, press
>
, select Applications
and scroll right to open the
general log. For each
communication event, you can
see the sender or recipient
name, phone number, name of
the service provider, or access
point. You can filter the
general log to view just one
type of event, and create new
contact cards based on the log information.
, and select Applications
> Log,
> Log >
71