Infrared Connection - Nokia N73 User Manual

Set as authorized—Connections between your device and
this device can be made without your knowledge. No separate
acceptance or authorization is needed. Use this status for
your own devices, such as your compatible headset or PC,
or devices that belong to someone you trust.
authorized devices in the paired devices view.
Set as unauthorized—Connection requests from this device
must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Delete. If you want to cancel all pairings, select
Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is
removed immediately, and the connection to the
device is switched off.
Receive data using Bluetooth connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
placed in the Inbox
through Bluetooth connectivity are indicated by
See "Inbox—receive messages," p. 57.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select
82
is shown, and the item is
folder in Messaging. Messages received
Bluetooth

Infrared connection

With infrared, you can transfer data such as business cards,
calendar notes, and media files with a compatible device.
indicates
See also "Modem," p. 83.
Do not point the infrared (IR) beam at anyone's eye or allow
it to interfere with other IR devices. This device is a Class 1
laser product.
Options >
Options > Send and receive data using infrared
1 Make sure that the infrared ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
preferable distance between the two devices is up to 3
feet (1 meter).
2 The user of the receiving device activates the infrared port.
To activate the infrared port of your device to receive data
through infrared, press
3 The user of the sending device selects the desired
infrared function to start the data transfer.
To send data through infrared, locate the desired file in
.
an application or the file manager, and select
Send > Via
If data transfer is not started within 1 minute after the
activation of the infrared port, the connection is cancelled
> Off.
and must be started again.
, and select Tools
infrared.
> Infrared.
Options >