Still Image Camera Settings - Nokia N73 User Manual

• To tag images to the Print Basket for later printing,
select Add to Print Basket.
• To print the picture, select Print. See "Image print," p. 31.
• To capture a new image, select
To rename the image, select
To use the picture as wallpaper in the active standby, select
Options > Set as wallpaper.

Still image camera settings

There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust
"Setup settings—Adjust color and lighting," p. 22. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Image quality—Print 3M -
resolution), Print 2M - Medium
Print/e-mail 0.8M - Small
Multimedia message 0.3M
better the image quality, the more memory the image
consumes. If you want to print the image, select
Large, Print 2M - Medium, or
If you want to send it through e-mail, select
0.8M - Small. To send the image through MMS, select
Multimedia message 0.3M.
New image.
Options > Rename image.
Image setup, see
Large-Large (2048x1536
(1600x1200 resolution),
(1024x768 resolution), or
(640x480 resolution). The
Print 3M -
Print/e-mail 0.8M - Small.
Print/e-mail
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
Show captured image—Select
captured image after it is taken, or
continue taking pictures immediately.
Default image name—Define the default name for the
captured images.
Extended digital zoom (main camera only)—Select
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
Capture tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Restore camera settings—Select
values to the camera settings.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
On if you want to see the
Off if you want to
On to
OK to return the default
21