Visual Radio - Nokia N73 User Manual

To increase or decrease the volume, use the volume key on
the side of your device.
If available, select
Pause—To pause the playback
Stop—To stop the playback
Quality—To select the playback quality. If the playback
appears uneven and slow, select
Full screen—To play the file using the entire display. To
return to the normal screen, select
Even though they are not visible in full screen, the key
functions may still be available when you press either
selection key.
Fit to screen—To play the file in its original size after
zooming it
Pan mode on—To be able to move around the display with
the scroll key when you have zoomed in

Visual Radio

Press , and select
application as a traditional FM radio with automatic tuning
and saved stations, or with parallel visual information related
to the radio program on the display, if you tune to stations
that offer Visual Radio service. The Visual Radio service uses
packet data (network service). You can listen to the FM radio
while using other applications.
44
Options and from the following:
Normal or Low.
Normal screen.
Applications > Radio. You can use the
If you do not have access to the Visual Radio service, the
operators and radio stations in your area may not support
Visual Radio.
You can normally make a call or answer an incoming call
while listening to the radio. The radio is muted when there
is an active call.
The radio selects the used frequency band based on the
country information received from the network. If this
information is not available, you may be asked to select the
region you are located in, or you can select the region in
the Visual Radio settings. See "Settings," p. 98.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
The FM radio depends on an antenna other than the wireless
device antenna. A compatible headset or enhancement
needs to be attached to the device for the FM radio to
function properly.
Press , and select Applications
search, select or . To change the frequency manually,
select Options > Manual tuning.
If you have previously saved radio stations, select
to go to the next or previous saved station, or press
the corresponding number key to select the memory
location of a station.
> Radio. To start a station
or