Specifications - Extech Instruments SD200 User Manual

Specifications

Display
Temperature probes
Memory Card
Datalogger Sampling Time
Temperature Compensation
Display update rate
Data Output
Operating Temperature
Operating Humidity
Power Supply
Battery life
Weight
Dimension
Type K Thermometer
Range
-50.0 to 1300.0 °C
-50.1 to -100.0°C
-58.0 to 2372.0°F
-58.1 to -148.0°F
Note: Above specification tests under the environment RF Field Strength less than 3 V/M & frequency
less than 30 MHz only.
All EU users are legally bound by the Battery Ordinance to return all used batteries to
community collection points or wherever batteries / accumulators are sold.
Disposal in household trash or refuse is prohibited.
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
Other Battery Safety Reminders

Never dispose of batteries in a fire. Batteries may explode or leak.

Never mix battery types. Always install new batteries of the same type.
All rights reserved including the right of reproduction in whole or in part in any form
60 mm x 50 mm (2.4 x 2.0") LCD
Type K thermocouple
SD memory card, 1 GB to 16 GB.
5/10/30/60/120/300/600 seconds or Auto.
Automatic
Approx. 1 second
RS 232
0 to 50 °C (32 to 122°F)
Less than 85% R.H.
6 AAA (UM4) Alkaline or heavy duty 1.5 V batteries or
9V AC adaptor.
Dependent on sample rate, for new alkaline batteries and 60 second
sampling time, > one month is typical. Fast sample rates will
significantly reduce battery life.
199 g /0.44 LB
132 x 80 x 32 mm (5.2 x 3.1 x 1.3")
Resolution
0.1°C
0.1°F
Copyright © 2013 FLIR Systems, Inc.
ISO-9001 Certified
www.extech.com
7
Accuracy (of reading)
±( 0.5 % + 0.5°C)
±( 0.5 % + 1°C )
±( 0.5 % + 1°F )
±( 0.5 % + 1.8°F )
SD200-EU-EN V1.8 07/13