Table of Contents
Advertisement
INSTALLATION: "GAS CONNECTION"
The hob can be built-in ; it is type "X" for built-in hob (in compliance with electrical
regulations EN 60.335.2.6) ; in class 3 (in compliance with gas norm EN 30.1.1) ;
adjoining furniture should not be higher than the level of the hob.
This appliance is not connected to an evacuation device for the products of combustion. It
must be installed and connected in compliance with the norms in force in the country of
installation. Particular attention should be given to the availability of ventilation. The turno-
ver of air necessary for combustion is a minimum of 2 m
Gas connection should be carried out in compliance with the norms in force in the
country of installation. A stop tap, a regulator valve or a release valve for propane gas,
should be fitted to the gas supply pipe. Use only taps, regulator valves, connectors and
flexible hoses with the official mark of approval of the country of installation.
CONNECT DIRECTLY TO THE THREADED END OF THE INLET
PIPE ISO 7-1.
10
10
10
10
10
"GAS CONNECTION"
"GAS CONNECTION"
"GAS CONNECTION"
"GAS CONNECTION"
3
/h per kW of power.
Advertisement
Table of Contents
