Download Print this page

Zanussi ZC 550 ML User Manual page 7

Gas cooker zc 550 ml; zc 550 mh

Advertisement

12
ADAPTING TO DIFFERENT GAS AND ADJUSTING
The burners can be adapted to different types of gas by mounting nozzles to the
type of gas in question. After, it will necessary to regulate the primary air and
adjust the minimum flow.
CHANGING OF NOZZLES
CHANGING OF NOZZLES FOR HOB
-
remove the pan supports and the burners
-
unscrew the two screws and remove the hob
-
unscrew the nozzles and replace them with the right ones (in the exchange set
delivered), conferring to the nozzles table.
CHANGING OF NOZZLES FOR OVEN
-
remove the oven bottom.
-
unscrew the fixing screw and remove the oven burner.
-
unscrew the nozzles and replace them with the right ones (in the exchange set
delivered), conferring to the nozzles table.
CHANGING OF GRILL BURNER NOZZLES
-
remove the burner by unscrewing the screw fixing it on the upper part.
-
unscrew the nozzle by a 10 mm and replace it with the corresponding one for
the type of gas and burner according to table of nozzles.
AIR ADJUSTING
The burner is well adjusted when the flame is stable silent ant dies out whiteout
any noise.
• when the flames are too short, whistling or have the tendency to detach of the
burners, ignite at the nozzles means that the air admission has to be
diminished. If there is too much air flames risk to die out.
• But, if the flames are too long, soft, lighting, the air admission has to be
increased. These flames smoke the bottom of pans.
13
correct adjusting
no air
HOB BURNERS
− Remove the pan supports and the burners.
− Unscrew the two screws in front of hob and remove it.
− Replace the burners.
− Unscrew the air adjusting screw.
− Move the air adjusting downwards for diminishing the air, upwards for increasing
it, for obtaining a correct adjusting of the burner.
− Screw the fixing screw.
fixing screw
air adjusting
OVEN BURNER
-
Remove the oven bottom
-
Unscrew the air adjusting fixing screw
-
Move the air adjusting forward for diminishing the air or backwards for
increasing it, for obtaining a correct adjusting of the burner.
-
Screw the fixing screw.
excess of air

Advertisement

loading