Pip, Pop Function - Mitsubishi Electric LDT462V User Manual

Other functions (continued)
The following table shows the combinations of signal inputs with which the "PIP" and "POP" modes function. However, these modes
do not function when the screen size is "CUSTOM" or "REAL".
HDMI
DVI-D
D-SUB
OPTION*
YPbPr
S-VIDEO
VIDEO
 : Supported
* OPTION can be used when an extension module is mounted on the option slot.
By pressing the PIP ON/OFF button on the wireless remote control, you can change the PIP, POP, and SIDE BY SIDE modes in the
order shown below.
Alternatively, you can change the modes using the PIP MODE setting of PIP in the OSD main menu. See page 47.
PIP
The resolutions in the PIP and SIDE BY SIDE FULL modes are as follows:
PIP SIZE
SIDE BY SIDE FULL
NOTE:
When the PIP or SIDE BY SIDE FULL mode has been selected, images in the sub picture always fi t the size of each mode shown
above irrespective of the aspect ratio of the input image.

PIP, POP function

HDMI DVI-D D-SUB
× × ×
× × ×
× × ×
× × ×
× × ×
  
  
× : Not supported
POP SIDE BY SIDE
< SMALL > : 450 pixels X 338 pixels
< MIDDLE > : 675 pixels X 450 pixels
< LARGE > : 900 pixels X 675 pixels
: 960 pixels X 1080 pixels
English-55
Sub screen
OPTION* YPbPr
× ×
× ×
× ×
× ×
× ×
 
 
SIDE BY SIDE
ASPECT FULL
S-VIDEO VIDEO
 
 
 
 
 
× ×
× ×
OFF